Milk Test Sample Shipping Kit

The Easy and Safe Way to Prepare and Send Your Milk Test Samples Shipping Kit
Sending milk test samples for analysis requires to follow a strict protocol, to insure that the the milk sample stays good. There are 2 ways to do this: the hard way, and the easy way.The hard way requires you to find and assemble all the parts needed to build an insulated box. It requires you to procure a box, some styrofoam, cut the styrofoam to the right dimensions to fit inside the box to create an insulated container, order milk test vials with labels, find and buy gel packs, and add reclosable bags. You can imagine how long it would take you to do all this.The easy way to do this is to order a Cratek Supply pre-assembled milk test sample shipping kit. The kits are shipped disassembled, to reduce shipping costs (assembly will be required). We can also ship the kits assembled, but the shipping and handling fees will be higher.

Please see pricing chart at the bottom of the page

What’s Included in the Kit
  • 1 – corrugated carton box 8” x 8” x 6” (hereafter referred to as the box)
  • 2 – 8” x 8” x 1” EPE (Extruded Polyethylene) insulation boards (one each for the top and bottom of the box)
  • 4 – 7” x 4” x 1” EPE (Extruded Polyethylene) insulation boards (one each for the sides of the box)
  • 2 – 8 oz gel packs
  • 1 – milk test vial (note – the interior of the vial is sterile until opened)
  • 1 – vial label
  • 2 – 6” x 4” reclosable bags ( 1 for a filled vial, and 1 for your notes/payment)

Please see pricing chart at the bottom of the page

Milk Test Sample Shipping Kit Assembly Instructions
  1. Place gel packs in a freezer on a flat surface at least 24 hours prior to sampling date (stacking is okay)
  2. Tape the bottom of the box, making sure that the box shows the dimensions and certificate
  3. Place one of the large insulation sheets (8 x 8 x 1) in the bottom of the box
  4. Using the 4 smaller insulation sheets, line the sides of the box by interlocking pieces to fit snug
  5. Place one frozen gel pack in the void made by insulation procedure above (inside the now insulated box)
  6. Include payment and/or notes in one of the sealed 6 x 4 baggies
  7. Wrap the vial containing the milk sample with a paper towel(s), and place it in another 6 x 4 baggie, seal the bag, and place in the insulated box
  8. Place the second frozen gel pack on top of the box’s content
  9. Finish by placing the second large insulation sheet (8 x 8 x 1) on top of the box’s content to complete the insulated box — make sure that the box’s flaps can be closed easily without extreme pressure, and that all sides fit without gaps
  10. End by taping the top of the box and by affixing the mailing labels

Pricing

QTY COST Shipping and Handling* Per Unit Cost TOTAL Order
1 $6.00 $15.00 $6.00 $21.00
6 $35.00 $20.00 $5.84 $55.00
12 $60.00 $35.00 $5.00 $95.00
* Shipped disassembled, within Colorado – Additional UPS fees may apply.

For Additional Quantities, Please Contact Us for a Quote